Bro-Cure curing compound 25 l

Bro-Cure curing compound 25 L is a silicate-based curing compound (initial curing compound or intermediate curing compound) suitable for both horizontal and vertical concrete surfaces.

The curing compound forms a white, water-impermeable protective film on the concrete surface that prevents water from evaporating from the concrete as it hardens. This is essential to ensure optimal strength development. Properly cured concrete is typically harder, with a dust-free surface and fewer shrinkage cracks. Also suitable for use on concrete surfaces that will later be finished with a coating, paint, topping, or other surface treatment methods.

Suitable for use in drinking water structures. Approved for Swan-labeled buildings.

The product coverage is approximately 1 L / 12–15 m2.

Benefits

• Suitable for use in drinking water structures.
• Suitable for use between pours. A perfect product for applications where the interval between pours is short (1–2 h), such as slipforming and wind turbine foundations.
• Does not interfere with the application, penetration, or adhesion of surface treatment products used later. No need for mechanical or chemical removal.
• Does not form a slippery film. This is important on surfaces exposed to pedestrian and vehicle traffic a few days after application.
• Improves the concrete’s chemical resistance and makes the surface dirt-repellent.
• Increases surface strength and reduces cracking.
• Easy to spray.
• Does not contain hydrocarbon solvents.
• A red fugitive dye makes even application easier.
• BRO-CURE complies with the DIN EN 1504-2 bond pull-off strength requirement without affecting the concrete’s strength properties.
• Green Engineered™ – a better choice for health and the environment.
• Meets all national and international VOC requirements.

Technical specifications