WTX Vector Rapid mounting adhesive 290 ml natural beige

Tytan Vector Rapid mounting adhesive 290 ml natural white is an MS polymer-based 1-component mounting adhesive for general-purpose use indoors and outdoors. Bonds a wide range of materials, including concrete, stone, plaster, brick, glass, cork, and particle board. Not suitable for PE/PP/Teflon/bitumen.

Tytan Vector Rapid adhesive and sealing compound is resistant to UV radiation and moisture and cures when exposed to air humidity. Contains no solvents, isocyanates, or water. The extra-wide nozzle enables fast initial grab. High initial and final strength. The product is not intended for use on surfaces that are continuously wet.

Product features:
• natural white
• Cures with air humidity
• Works underwater
• Shore A 50
• Special nozzle
• Good chemical resistance (dilute solutions)
• Extremely fast (approx. 5 seconds) and strong initial grab.

Technical data

Skin formation	approx. 15 min
Suitable for	Indoor and outdoor use
Application temperature	+10 °C ... +25 °C
Optimal application temperature	+15 °C ... +25 °C, humidity 60%
Curing	2.5 - 3 mm / 24 h
Heat resistance (after curing)	-40 °C ... +80 °C
Density	1.47 g/l
Shear strength	3.92 N/mm²
Shelf life	12 months from manufacture unopened at +5...+25 °C