Makita
Makita DTR181ZJ rebar tying tool 18V bare tool
Product Code: 454-DTR181ZJ
EAN: 088381745093
Print:
|
In stock
Request login credentials
Makita DTR181ZJ rebar tying tool, 18V bare tool, for fast and effortless tying of rebar as well as underfloor heating cables. Extremely easy-to-use tying machine. The machine can be operated with one hand, allowing you to adjust the position of the reinforcement with the other hand. The tying tightness can be adjusted on a scale of 1–6 according to the material being tied. Maximum capacity: 22 x 25 mm pipes and steel. Bare version with case.
The DTR181 is a fast and efficient brushless wire tying machine. With this quick and convenient tying tool, you can tie reinforcement, underfloor heating pipes, and cables quickly and ergonomically. The machine is ergonomic and can make up to 5,000 ties on a single fully charged 6.0 Ah battery. The tying machine operates with one Makita 18V LXT battery.
The machine can be conveniently operated with one hand, allowing you to adjust the position of the reinforcement with the other hand. The tool’s balance reduces strain on the wrist, and the rubber-coated handle ensures a firm grip. Makita XPT system effectively protects the machine against water and dust even in the most demanding conditions.
The tying machine has two alternative trigger modes. In single-tie mode, the machine makes one tie when the trigger is pressed. In continuous mode, the trigger is held down and the machine makes a new tie whenever the jaws are in contact with the tying target.
The tying tightness can be adjusted on a scale of 1–6 according to the material. Replacing an empty wire spool is quick and easy.
Benefits:
Technical specifications
The DTR181 is a fast and efficient brushless wire tying machine. With this quick and convenient tying tool, you can tie reinforcement, underfloor heating pipes, and cables quickly and ergonomically. The machine is ergonomic and can make up to 5,000 ties on a single fully charged 6.0 Ah battery. The tying machine operates with one Makita 18V LXT battery.
The machine can be conveniently operated with one hand, allowing you to adjust the position of the reinforcement with the other hand. The tool’s balance reduces strain on the wrist, and the rubber-coated handle ensures a firm grip. Makita XPT system effectively protects the machine against water and dust even in the most demanding conditions.
The tying machine has two alternative trigger modes. In single-tie mode, the machine makes one tie when the trigger is pressed. In continuous mode, the trigger is held down and the machine makes a new tie whenever the jaws are in contact with the tying target.
The tying tightness can be adjusted on a scale of 1–6 according to the material. Replacing an empty wire spool is quick and easy.
Benefits:
- Improved dust and water resistance thanks to XPT technology (Extreme Protection Technology).
- Battery protection system. Automatically cuts off power when the battery charge level is low.
| Voltage | 18 V |
| Battery type | LXT |
| Battery protection system | |
| Case | |
| Weight with battery (EPTA) | 2.4 - 2.7 kg |
| Product dimensions (L x W x H): | 319 x 93 x 318 mm |
| Steel capacity | 25 x 25 mm |
| Steel wire thickness | 0.8 mm |
Specifications
Voltage:
18V
Battery type:
LXT
Makita DTR181ZJ rebar tying tool 18V bare tool
Keskusvarasto
Vantaa
Oulu
Turku
Jyväskylä
Pirkkala
Kuopio
Ylöjärvi